Mixing unit with Wilo Pump and Manifold with 4 Circuits Underfloor Heating

Description Complex system for mixing the thermal agent required for underfloor heating with 4 circuits, ideal for 70-85 square meters,

Maximum length of the pipeline on the route 90 meters Calculation generated at a step of 10 cm. Consisting of :

1 x distributor set 4 circuits with flowmeters

1 x distributor set 4 circuits with valves (possibility of connecting the actuator with the command to the room thermostat)

1 x distributor clamp set 8 x eurocone nut for pex pipe 16 mm x 2 mm thick (pe-xa,pe-xb,pe-xc,pe-rt)

2 x distributor end tee with automatic vent and emptying

1 x mixing group for underfloor heating

1 x Wilo Yonos Para 25/6 pump Technical details: Distributor with flow meter 1″x 8 ways + eurocone nuts 16mm + distributor end tee with automatic aerator and emptying

1 x 1″ x 4-way stainless steel distributor set with thermostatic valves (predisposition for mounting a thermoelectric head (actuator) for automation on each circuit)

1 x 1″ x 4 stainless steel distributor set with flow meter (to adjust the flow on each circuit depending on the length of the pipe used in the circuit)

1 x Distributor mounting set consisting of 2 consoles 8 x Eurocon nut 16×3/4 (to make the connection from the distributor to the pe-xa, pe-xb, pe-xc, pe-rt of 16mm with 2mm thickness 16×2) 2 x distributor end tee 1″ (automatic air vent for removing the air from the distributors, emptying valve)

Maximum pressure 10 bars Maximum temperature 90 degrees C Underfloor heating unit equipped with Wilo Yonos Para 25/6 pump

Available with fixed adjustment through the thermostat head with probe: adjustment range 20 – 60 degrees C. The inlet valve controlled by the thermostatic head allows adjusting the inlet temperature of the heating agent supplied by the boiler to maintain a constant temperature in the floor It allows mixing between the heating agent supplied by the boiler and the one on the floor return.