Roll over image to zoom in
Uponor Fluvia T pump group Push-23-BW, 1078304
629,00 €
|
model
|
Fluvia
|
|
item quantity 1
|
1
|
|
item quantity 2
|
55
|
|
Unit of measurement
|
st
|
|
Cylindrical internal thread G
|
3/4 in
|
|
Cylindrical internal thread G1
|
1 in
|
|
active power
|
52 w
|
|
nominal voltage
|
230V
|
|
flow rate
|
S 1.2 / R 2.7 m³/h
|
|
Pressure
|
6 bars
|
|
length (l)
|
251mm
|
|
length (l1)
|
218mm
|
|
length (l2)
|
117mm
|
|
length (l3)
|
98mm
|
|
z dimension h
|
96mm
|
|
z dimension h1
|
50mm
|
|
z dimension w
|
348mm
|
– Incl. pump
– Maximum heat load: 10 kW
– Flow valve: (kvs 1.2 m³/h)
– Water temperature and flow rate is controlled by the thermostat using a capillary sensor
– Maximum heat load: 10 kW
– Flow valve: (kvs 1.2 m³/h)
– Water temperature and flow rate is controlled by the thermostat using a capillary sensor
APPLICATION
– For connection to Uponor manifolds, for installation on the wall or in manifold cabinets
– Max. primary temperature: 90 °C
– Max. secondary temperature: 55 °C
– Max. pressure: 6 bar
– Max. primary temperature: 90 °C
– Max. secondary temperature: 55 °C
– Max. pressure: 6 bar
TENDER
Pump group for connection to Uponor heating circuit manifolds, for installation on walls or in manifold cabinets, with thermostat for constant flow temperature control, thermostat capillary tube sensor 20 – 55 °C Grundfos pump: Q: 0.1 – 2.5 m3/h, H: 1.2 – 7 m EEI ≤ 0.20 Supply thermostatic valve kvs 1.2 m3/h Return regulating valve kvs 2.7 m3/h Primary circuit connection Rp 3/4″ Secondary circuit connection G1″ for direct connection to Uponor distributor 2 screw connections G1″/G1″ IG/AG for optional connection to secondary ball valves are included Output up to max. 10 KW Flow temperature:
secondary side max. 55 °C primary side max. 90 °C max. 6 bar
secondary side max. 55 °C primary side max. 90 °C max. 6 bar
Reviews
There are no reviews yet.